Ahlborn ALMEMO 2390-5 Instrukcje Operacyjne Strona 51

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 60
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 50
interface module !).
BAUD RATE function ´BR´
Select by pressing key FUNCTION..
U n 9 6 0 0 BR
Example:
Output to interface ´U´, in ´side-by-side´ format, 9600 baud
To enter this information press thePROG key twice, then set the baud rate by
means of the and keys, and then program by pressing thePROG key once
more. The baud rate is saved to the EEPROM in the interface module and thus
applies whenever any other ALMEMO
®
device is used. The procedure for set-
ting the output format is described in Section 6.3.3.
Data format : 8 data bits, 1 stop bit, no parity (settings cannot be changed)
9.3 Device address and networking
All ALMEMO
®
devices can be networked together very easily thus enabling the
user to centrally acquire and record measured values from several measuring
instruments - even if these are located far apart (see Manual, Section 5.3). To
communicate with networked devices it is absolutely indispensable that each
device should have its own dedicated address; this is because only one device
should respond per command. Before starting network operation therefore en-
sure that all the measuring instruments involved are assigned different device
numbers. This is the purpose of the DEVICE address function ´A´. This functi-
on is selected after activation (see Section 5.2) by pressing the FUNCTION key;
the device number currently set should appear; the factory default setting is
usually 00. This can now be modified as desired by means of the usual data
entry procedure (see Section 5.4).
DEVICE address function ´A´
Select by the FUNCTION key Enter as per Sec. 5.4
0 1 A
Example:
address 01
In network operation consecutive numbers between 01 and 99 should be ente-
red; this ensures that device 00 is not addressed unnecessarily in the event of
interruption to the power supply.
ALMEMO
2390-5 51
Trouble shooting
Przeglądanie stron 50
1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 59 60

Komentarze do niniejszej Instrukcji

Brak uwag